|
High
Efficiency Street Lights
'The
new energy saving high efficiency lamp' (containing mixture of Neon
and Argon gas with solid Sodium) is ionised and resonated at 33KHz specially
designed electronics selective frequency convertor. For any given rating
the luminous efficacies by other H.I.D lamps.
|
Description:
35 W / 5400 W lumens, 55W/ 1100 W lumens,90 W / 18500 W lumens.Our
ESX lamp systems emits as high as same lumens of conventional
sodium lamps that consume 3 to 4 times more power
|
|
Description:
40 nos ESX 25 street lights 11000 lumens each on 5 KW Wind - PV
Hybrid system
|
|
High Efficiency High Intensity LED Lights
Description:
These can be utilized as replacements to the traditional tube
light based street lights.
|
The lamp with electronic control gear has following advantages:
- Luminous
efficacy improved 15%
- Ballast
losses are limited to mere 2 to 3 watts compared to 20 watts or more
by conventional ballasts
- No
ignitor requied
- Stepless
intensity control possible
- The
intensity of the lampcan be reduced to 50%, thereby acheiving further
energy savings of 50% viz a 35 watts lamp which gives 5200 lumens
can be made to work as 18 watts and still giving light output 2500
lumens
- High
frequency operation extends the lamp's useful life by minimum 20%
due to equalised electrode wear
- The
ballast can be easily interfaced to solat PV, wind and other renewable
energy sources
- No
stroboscopic effects
- High
luminous efficacy upto 200 lumens per watt results in very low power
costs
- Wavelength
emittd by the light is close to peak sensitivity of human eye
- No
ultra-violet radiation- results in insects not attracted to the light
which results in negligible soiling of the luminaire
- Extra
long life - more than 20,000 hours
Applications
- Trade
and industry:
Steel mills, foundry, general plants, cement works, ware houses and
transport depots, factory yards, parking lots, electrical plants,
shipyards & coal mines, petroleum dispensin stations
- Traffic
signals:
Motor-ways, arterial roads, tunnels & sub-ways, pedestrian crossings,
parks & garden paths, railway yards, internal roads of housing
complexes
- Flood
lighting & special applications:
Flood lighting of buildings, monuments, parks, land scape lighting,
surface of material testing, selective applications of bill board
lighting
The
stand-alone photovoltaic street lighting system
These
stand alone street lighting systems are unmanned and automatically operated
by sensing the day light at dawn and dusk with one day autonomy. These
systems are inherently safe for public use as they employee only 12V
DC power.
|
Description:
This consists
of a lighting system powered by a DC source, which is a rechargeable
battery, which in turn is charged by the power from the solar
photovoltaic module during daytime. The battery capacity and the
panel are designed for an average daily insolation of 5 Hrs. The
electronic control circuits are so designed that it can automatically
switch ON at dusk, operate throughout the night and automatically
switch OFF at dawn.
|
<<Back
to top
|
|
|
|
